|
TRACKING
Vibcon Corporation offers a variety of different tracking for their feed systems.
INLINES - These are powered horizontal vibratory tracks normally used to store pre-oriented parts, get the exit point away from the bowl or into your machine and to furnish a location for a full track switch to shut down the feeder when the track is full. We make standard and mini inlines. Both styles can be made any length except the mini can be no shorter than 6" long and the standard no shorter than 14" long.
GRAVITY TRACKS - These are basically non-powered tracks using gravity to function and are used as inexpensive way to track parts or in some cases can "snake" through tight locations. The can be designed for any angle or length, but we generally encourage a minimum of 30 - 35 degree down angle to get the full effect of gravity. The track can be bent at the end to match any angle.
BELT/CHAIN CONVEYORS - These conveyors use powered belts and/or chains to move the parts. The parts can be confined as with the inlines and gravity tracks and can have variable or constant speed motors.
Other types of tracks are available on request.
|
