This force-guided and FailSafe relay is 55mm wide and handles all monitoring needs. Use it with any of Sentrol Industrial’s Series 300-BT switches to meet all CE Standards.
2-1/8"(L) x 3"(H) x 4-1/2"(D)
INT Monitor Relay "Integrity Series"
This FailSafe, emergency stop relay is used with safety mats and E-Stop buttons where a force-guided relay is required.
The INT-05 is an expansion relay to be used with the INT-03 and INT-04. It adds three more safe outputs.
2-1/8"(L) x 3"(H) x 4-1/2"(D)
Safety Expansion Relay
INT-06 Series
The INT-06 is also an expansion relay with a time-delay feature (1-25 seconds) to allow for controlled stops for high inertia loads.
2-1/8"(L) x 3"(H) x 5-1/8"(D)
Safety Expansion Relay with Time Delay Opening
INT-22.5-024 Series
This CE compliant safety monitoring relay‘s 22.5mm width makes it a space saver. It is ideal where limited space is available such as in a machine control enclosure.
1"(L) x 4.5"(H) x 4"(D)
GuardSwitch™ Safety Monitor Relay
Junction Board (Safety Relays)
The JB-0300 is a junction board accessory to all the INT Series relays. It acts as a hub for the relay and allows you to wire two to five switches to the board with a single wire connection to the relay.
