WATCH VIDEO...CLICK HERE...

The Best Conveyors are Built on the Strongest Frames

• Single piece extruded aluminum frame for conveyors up to 12" wide
• Strong multi-piece aluminum and steel frame for conveyors 18" wide and wider
• Frames designed to reduce both lateral and longitudinal deflections
• Built in Tee Slots for easy stand and accessory mounting

Pivot™ rotatable drives...

Give you the flexibility to move the drive out of the way as your application requirements change. Simply loosen two screws and rotate the drive to the desired position to clear machine obstacles or product on the belt. When positioned below the conveyor, the belt is the highest point.

• Capable of speeds up to 400 fpm.
• Compatible with any Standard Duty AC or DC Gearmotor

Push-button Operation

Our Tension Release technology operates at the push of a button to relieve tension on the belt. Cleaning under the belt is quick and easy, with no tension or tracking adjustments required. Belt changes are simple — and the only tools you’ll need are for the mounts and brackets.

• Push-button operation for fast, easy belt changes
• Snaps back into place — properly tensioned — with a gentle push

Built-in Support for Optional V-Guide Belts

• All conveyors support V-Guide belting with no additional parts
• Ideal for reversing and side-exiting applications where belt tracking might otherwise be difficult to maintain
• Non V-Guide belts are standard for non-reversing applications

The new Automation Series Center Drive conveyors have many of the properties as the End Driver models but feature a movable center drive WITHOUT losing belt tension.

Ideal for applications where both ends will be integrated with other machines. The drive package is completely below the belt and can be moved to any point on the frame to clear obstacles.

Return idlers are easily removed for rapid belt changes without removing the drive.

WATCH VIDEO... CLICK HERE...

QC Industries also does custom solutions...

Today we shipped a set of AS65 conveyors that contained two unique modifications from our specials engineering department: a cutout in the frame and a gang drive system. Our customer requested the cutout to allow a robot arm to pass under the conveyor; even our normal low profile wasn’t enough in this case. Our specials engineering team added a set of idlers on either side of the cutout to raise the belt tight against the frame.

The gang drive allows the two conveyors to operate using a single drive, and ensures that their indexing is synchronized. The part being conveyed straddles the top of both conveyors. A shaft (under the slotted guard) transfers power from the motorized conveyor to the non-motorized one.
 

The 125 Series line of conveyors from QC Industries feature a very low profile (1.89”), allowing these unique conveyors to be used in tight quarters where conventional conveyors will not fit. Belt widths of 2” to 24” are available, in lengths from 2 feet to 12 feet, with load carrying capacity of up to 450 pounds.

The 125Z Series line of angled frame conveyors from QC Industries feature the same low profile (1.89”) of our popular 125 Series belt conveyors, allowing these unique conveyors to be used in tight quarters where conventional conveyors will not fit. A variety of angles and configurations make these conveyors ideal for applications that require elevation changes, including manufacturing plants, automation cells, packaging lines and metal stamping environments.
Our unique ™Z-Track allows users to gain control over belt tracking at the angles of incline or decline. This component adjusts rapidly for belt installation and tracking adjustments then locks in the tracking setting to ensure long belt life.

The 250 Series line of conveyors from QC Industries are able to move heavy loads — up to 630 lbs. These conveyors are also available in longer lengths. They feature a unique drive that sits fully below the conveyor belt, making the belt the highest point on the conveyor. The 250 Series conveyor is well suited to applications that call for part overhang, as the drive is no longer an obstruction.

Belt widths of 2” to 24” are available, in lengths from 4 feet to 28 feet.

The 400 Series
Widths up to 60" and lengths up to 100'. Low profile conveyor — only 3" high. Tight belt-to-frame width ratio (Belt width 0.72" less than frame width). High speeds up to 2000 fpm. Self aligning drive bearings with seals. Bearings can be lubricated rapidly without drive removal. Optional self-tracking V-guide is thermally welded to the carcass of the belt. Ability to run multiple bands of belting on one conveyor. Quick belt change without removal of drive package or guide rails. Heavy duty load carrying capacities. High impact resistant single piece formed powder coated 10-gauge steel frame. Wide variety of application specific belting. 400 Series Heavy Duty Conveyors are available in Corrosion Resistant, Cleated Belt and Magnetic styles.

InnerDrive Conveyors
By moving the drive motor inside the conveyor pulley, InnerDrive Conveyors offer significant space savings over traditional conveyor drive packages. With a profile of only 2.54”, InnerDrive Conveyors can fit almost any application.

• · Quiet, Efficient 24vdc Motor
  Located inside the drive pulley, maximum torque is provided by integrated internal gears for speeds up to 60 feet per minute and loads up to 100 lbs.
• · Safe and Maintenance-Free
  This unique conveyor design frees you from lubricating bearings and gearboxes. The low-voltage motor protects workers from dangerous currents.
• · Variable Speed Control Card
  Easily integrates with automation systems for “run on demand” applications, using inhibit/run controls from devices such as timers and photo-eyes. Lighted indicators identify status at a glance.

Example of a gang driven conveyors.

3 conveyors with one motor and flexible couplers. 

This design is recommended because it increases the life of the bearings on each conveyor.

This drawing also shows the minimum distances between belts.