A Comparison of Features versus Price

Add Approx. $140 to each actuator price for cables

ERC2   Stepper w/ built-in controller

Stepper motors operated closed loop like an AC Servo

Ultra-low cost based on unique design

Intended to be lowest price option

Repeatability to +/- 0.05mm

Select NPN either PNP as your I/O

Select a 3, 8, or 16 point positioning pattern

Simply connect cables to a PLC and a 24v supply

Rod (300mm) :  RA6C=$610,  RA7C=$690

Slider (300mm):  SA6C=$760,  SA7C=940

RCP2   Stepper w/ separate controller

Repeatability to +/- 0.02mm

Powerful push force due to stepper characteristics

Ideal for press-fitting at low speed with hi-torque

Load capacity decreases at higher speeds

6 different controllers to choose from

Programming software is like an Excel spreadsheet

Up to 80 kgm of push force for press-fits & clamping

Rod (300mm) :  RA4C=$520,  RA6C=$700

Slider (300mm):  SA6C=$745,  SA7C=$890

Slider Belt(900mm): BA6=$1290,  BA7=$1680

Positioning Controller:  $250

RCA    24vdc Compact Servo

Your most cost effective AC Servo option

High thrust over wider speed range

High speeds up to 1000mm/s minimize cycle-time

Rod type is shaped like an air cylinder

Offers multi-funtion controllers & 2-axis control

Rod (300mm) :  RA4C=$800

Slider (300mm):  SA6C=$1005

Positioning Controller(A-CON-C):  $450

RCS2    200vac  Small/Medium size Servo

Enables hi-speed transfer of fairly heavy loads

3-times the horizon. load capacity of RCA type

Twice the speed for given load capacity of RCA type

Offers multi-funtion controllers & 6-axis control

Rod (300mm) :  RA4C=$800

Slider (300mm):  SA4C=$1060,  SA6C=$1110

4-Function Controller(SCON-C):  $1200

RCS2    Ultra-High Thrust RA13R

2 tons of pressing force thanks to 750w servo motor

Use for press-fitting & staking the require powerful forces

Control speed during movement difficult for a reg. press

Rod (200mm): RA13S=$9300

Positioning Controller(SCON-C)=$1800

ISPA   1-Axis Higher-precision, Heavy Duty

Higher precision ball screws & encoder

Precision units:   +/- 0.01mm reapeatability

Beefier: Extremely strong hollow extrded alum. base

Higher strength to weight ratio for larger cantilevers

For longer strokes, higher speed, larger payloads

Designed for single & multi-axis duty

1-Slider (900mm):  ISPA=$4290

1-Axis Positioning Controller: P-Driver=

4-Axis Cartesian Controller: X-SEL=

NS   Rotating Nut  Linear Actuators

2400mm/s possible because ball screw does not rotate

3000mm strokes is stunning for a ball screw machine

2-independant sliders can operate  w/ collision prevention

Dangerous high-speed shaft rotation is eliminated

Maximum speed does not decrease with stroke length

1-Slider (900mm): LXMS=$6560

2-Slider (950mm): LXMM=$10410

1-axis controller: SCON Positioner=$1200

2-axis controller: SSEL Positioner/Program=$2800

LSA Linear Servo Actuator

Small flat motor achieves high thrust

Up to 120 kg payloads up to 4m in stroke length

2500mm/s max speeds possible

Shorter cycle time due to 3G accellerations

Muti-slider and syncronization possible

1-Slider (900mm):  S8SS=$4290

1-Axis Positioning controller:  SCON=$1200

2-Axis Positioning controller:  SSEL=$1850

RCP2  RT Rotary Actuators

Positioning of 360 degrees & beyond (no stopper)

Able to continually feed in same direction

Can spin continually in a single direction

Servo controlling of a stepper motor

Up to 1.1 N-m of torque via reducer ratios of up to 30:1

Rotationsal speed up to 600 degrees/sec

RotaryActuator:  RTBL=$1250

24vdc Controller: $280

RCP2  Grippers

Compact lightweight grippers generate high gripping force

3-fingers grip automatically centers the load.

3-finger grippers securely grips circular and cylindrical loads.

The grip force can be changed effortlessly

Up to 64 positions can be set

Servo controlled chucks with built-in encoder

High gripping forces of up to 80 N

2-Finger:  GRM=$1570

3-Finger:  GR3LS=$1500

Positioning Controller:  PCON=$250