Banner


	Sign up for our Email Newsletter For Email Newsletters you can trust


	Banner Vision



	Link to our lighting page



	Link to Lens sizing charts


		iVu Series TG Image Sensor

	No PC required to configure, change or monitor Easy configuration: install/connect iVu, select sensor type, acquire image, set inspection parameters Advanced capabilities: menu-driven tools guide you as you set up your inspection Three advanced sensors in one rugged package: a Match sensor, an Area sensor, and an Area sensor that adjusts with motion Intuitive interface and sophisticated features make powerful inspection capabilities simple Software emulator lets you perfect your application offline Compact, rugged housing available with or without a variety of integrated ring lights- red, blue, green, and infrared

PresencePLUS P4 Series

Includes five models with Locate, Measure, Test, Communications and function-specific vision tools
Delivers high-performance vision inspections in a self-contained housing
Fits in the palm of your hand
Supports nine languages
Communicates over Ethernet, flexible I/O and serial protocols
Features remote TEACH function for inspection changeovers without a PC
Offers 10 to 30V dc supply voltage with software configurable inputs (NPN/PNP) and configurable outputs (NPN/PNP)
Connects directly to optional real-time video display, without a PC
Available in standard and high-resolution 1.3 megapixel models
Offered in right-angle or in-line housing styles
Available with a variety of mounting brackets, lenses and lighting accessories

Models:

New! P4 Geo $995

Banner P4 Geo low resolution Sensor is great for simple no go applications.

New! P4 Edge $995

Banner P4 Edge low Resolution sensor is great for simple edge detection apps. At 4 ms speeds, this sensor can handle high speed lines with ease.

New! P4 Mega Pixel Geo $1995

Banner P4 Mega Pixel Geo sensor gives you the resolution at a great price to find patterns for no go applications

New! P4 Mega Pixel Edge $1995

P4 Mega Pixel Edge mega pixel sensor gives you the resolution to find and measure edges at very high speeds


	P4 Applications:


	As fasteners are ejected onto a conveyor, a D10 sensor triggers a PresencePLUS P4 GEO to detect the presence of correct fasteners in any orientation (full 360 degree range) and to reject incorrect fasteners.

As boxes of film pass the PresencePLUS P4 GEO at a rate of 1000 boxes a minute, the P4 GEO verifies printed date and lot code. The operator uses the remote TEACH function to set new codes each day, without using a PC.

A D10 photoelectric sensor triggers each inspection when it detects the presence of a package.

P4 & Pro Literature:

PresencePLUS Sensor and Lighting Brochure (8MB)

Power Point of 2 applications using the Banner iVu and 1 application measuring to <0.5 degrees with P4 1.3mb camera

PresencePlus Pro $2300

Banner PresencePLUS Pro Vision Sensor

Features compact size for tight locations
Delivers high-performance vision inspections in a two-piece housing
Includes all the PresencePLUS Gray Scale tools: Locate, Pattern Find and Count, Geometric Find and Count, Edge, Object, Blob, Average Gray Scale and Measure
Features models with optional Bar Code Reader
Supports nine languages
Communicates over Ethernet, flexible I/O and serial protocols
Features remote TEACH function for inspection changeovers without a PC
Offers 10 to 30V dc supply voltage with software configurable inputs (NPN/PNP) and configurable outputs (NPN/PNP)
Connects directly to optional real-time video display, without a PC
Available with a variety of mounting brackets, lenses and lighting accessories
CCD Chip, 12 Products, software, cable, video out, 13 I


	Pro Applications:


	In an automobile manufacturing plant, the PresencePLUS Pro is mounted to look across at a fixtured molded plastic dashboard trim piece. A bank of high-frequency fluorescent lights is mounted above, to illuminate the part. Multiple Blob, Object, and Edge tools are used to detect the orientation and placement of pieces of foam padding and plastic nuts on the trim piece.

After all required holes are punched out of a gasket, it is moved to the inspection station. A PLC triggers the PresencePLUS Pro to start its inspection when the gasket is in the inspection zone.

Using multiple BLOB tools, the vision sensor counts and measures each hole. If any hole is missing or partially formed, the PresencePLUS Pro issues a failed inspection signal. The operator then removes the gasket and determines if it can be reworked.


	The PresencePLUS Pro PROII vision sensor verifies that the rivet was inserted completely. The vision sensor uses a Blob tool to determine if the rivet is present and has been properly formed.

Banner P4 Minnesota West Guitar Hero Robot

Banner Engineering wants to congratulate Pete & MN West on this project! We're happy our PresencePLUS P4 OMNI was able to help Pete finally beat his friend?

Industrial Control * 9267 Riley St * Zeeland, Michigan 49464 * 800-878-6722 * Fax 616-748-8800 * www.IndustrialControl.com
8:00 AM - 5:00 PM
Inside Sales 616-748-8200 or sales@industrialcontrol.com