EzLights

The components required for suite master are not published. Please check your publish settings in Fusion and republish the site.

"; } else { echo "

An error occured. Please contact the site administrator

Error code: 103

"; } exit(); } require_once($nof_rootDir . "/" . $nof_scriptDir . "/" . "nof_utils.inc.php"); $nof_resources->addFile($nof_langFile); ?> EzLights


	Banner EzLights used as Backlights target metal clips exactly where you need the light!


	Shown here is a fixture with the EzLights mounted and displaying Red for the machine vision camera.




		Click here to view Banners web site regarding EzLights.




		Here is a photo with the part in the fixture and EzLights glowing Red. When the camera does an inspection, it’s very easy to see the metal clip in place. Prior to installing the EzLights, it was hard to see the clips because they were over exposed with front lighting. We also programmed the EzLights to blink at the exactly location of the failure for the operator when the camera found a problem. At $60 each we saved $2,500 by not using standard backlights and we saved time with the easy installation. WHITE SOLID Camera nest is empty WHITE BLINK Camera in "BYPASS" mode for one cycle RED SOLID Part in nest and camera is ready for trigger signal RED BLINK Part faild vision test GREEN Part passed vision test Click here for a data sheet on the EzLights...


			2008 Training Schedule



			Click here for listings for our classes and events



	Industrial Control Service Inc. --- 9267 Riley St. Zeeland, MI 49464 --- phone: 800-878-6722 --- fax: 616-748-0060