Grippers

• Double Guided Wedge
• Wedge Sealed Jaws
• Wide Body Series
• Brawn Series
• T-Slot Bearing
• Double Guided T-Slot
• O-Ring Gripper
• Angular Grippers
• Three Jaw
• Motion - Modules
• Bar Puller

Rotary Actuators

Powered Slides

• Powered Slides
• Long Stroke Powered Slides
• Thrusters

Mini Power Slides

Feed Escapement

Hand Exchange

Load Limiters

Easypull Bar Pullers

• Can be adjusted to pull soft material, such as plastic or aluminum, without marking the finish
• Does not place any strain on spindle or ball screw
• Uses machine power
• Accurate part control
• Includes standard screw threads in fingers, allows adaptation of any type of gripping screw pads.
• Works on 100% rapid transverse
• Quick and easy setup in minutes

Range Shank Size Price 1/8 - 1-1/2 1" $349.00 1/8 - 1-1/2 1-1/4 349.00 1-1/2 - 3 1-1/4 449.00 1-1/2 - 3 1-1/2 449.00

Function:

• With spindle stopped puller is moved in rapid transverse on the z axis, and placed onto material bar.
• Puller locks onto the outside diameter of bar with a pair of properly adjusted set screws or custom-made fingers.
• The collet or chuck is programmed open and puller pulls bar to establish distances.
• Collet or chuck closed and puller moves off bar on the z axis and the puller releases open with an audible "snap".

Dimensions:

Model A* B C D Screw Overtravel Wgt. Bar Dia. BP1 1.000 or 1.250 1.625 3.900 2.230 10-32 Set 10-32 Button .050 3/4 lbs. 1/8 to 1.5 BP2 1.250 or 1.500 2.225 4.600 3.390 5/16 -18 5/16 - 18 Button .125 3 lbs. 1.5 to 3"