Gripping Force per Jaw @ 80psi: Closing = 10 lbs.; Opening = 12 lbs.
Time: Close = 0.12 sec.; Open = 0.12 sec.
Pressure Range: Low = 10 psi; High = 120 psi
Temperature Range: Low = -20 F; High = 180 F
Side Play: +/- 0.001"
Loading Capacity: Maximum Tensile T..........60 lbs. Maximum Comressive C...60 lbs. Maximum Moment Mx......60in/lb Maximum Moment My......60in/lb Maximum Moment Mz......60in/lb
Material: High strength, hard coated aluminum alloys and steel
Displacement: 0.10 cubic inch
Material: High strength, hard coated aluminum alloys and steel
Weight: 5 Oz.
Piston Diameter: 0.625 Inches
Jaws are T-Slot bearing supproted to prevent jaw breakage and offer superior load bearing performance.
High gripping force to weight ratio.
Compact design with long stroke.
True parallel jaw motion for easy tooling.
Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
Piston seals are quad ring type for long service life.
Proximity switches are available to monitor open and closed position of the jaws.
Series AGLP-500 are fully field repairable for cost savings and minimum down time.
Linkage is guided in the body for precise center repeatibility.
