Gripping Force per Jaw @ 80psi: Closing = 200 lbs.; Opening = 194 lbs.
Time: Close = 0.22 sec.; Open = 0.22 sec.
Pressure Range: Low = 10 psi; High = 120 psi
Temperature Range: Low = -20°F; High = 180°F
Side Play: +/- 0.001"
Loading Capacity: Maximum Tensile T..........1250 lbs. Maximum Comressive C...1250 lbs. Maximum Moment Mx......1250 in/lb Maximum Moment My......1250 in/lb Maximum Moment Mz......1000 in/lb
Displacement: 3.27 cubic inch
Material: High strength, hard coated aluminum alloys and steel
Weight: 2.3 lbs.
Piston Diameter: 2.75"
Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
High gripping force to weight ratio.
True Parallel jaw motion for easy tooling.
Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
Piston seals are quad-ring type for long service life.
Hall effect sensors are available to monitor open and closed position of the jaws.
AGP is fully field repairable for cost savings and minimum down time.
Optional Stripper plate ensures part preload in location upon release.
