AGP-375

The components required for suite master are not published. Please check your publish settings in Fusion and republish the site.

"; } else { echo "

An error occured. Please contact the site administrator

Error code: 103

"; } exit(); } require_once($nof_rootDir . "/" . $nof_scriptDir . "/" . "nof_utils.inc.php"); $nof_resources->addFile($nof_langFile); ?> AGP-375


	Contact information: IC Engineer: Roger Leep (616)-931-1322 roger@industrialcontrol.com Website: www.agi-automation.com Contact AGI: (203)-459-8345


	AGP-375 Double-Guided Wedge Parallel Gripper

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Parallel-Double Acting Synchronized Jaws

Stroke: 0.375"

Gripping Force per Jaw @ 80psi: Closing = 20 lbs.; Opening = 22 lbs.

Time: Close = 0.2 sec.; Open = 0.2 sec.

Air Consumption: 30 cubic inches/min

Pressure Range: Low = 30 psi; High = 150 psi

Temperature Range: Low = -20 F; High = 180 F

Side Play: +/- 0.001"

Repeatability from Center: +/- 0.002"

Displacement: 0.20 cubic inch

Material: High strength, hard coated aluminum alloys and steel

Weight: 7 oz

Piston Diameter: 1.00"

Ultra high gripping force to weight ratio.
True parallel jaw motion for easy tooling.
Units are permanently lubricated for non-lube air operation, allowing for OSHA compliance.
Piston seals are quad-ring type for long service life.
Additional side mounting holes and side air ports for optional mounting and porting.
Proximity switches are available to monitor open and closed position of the jaws.
Series AGP-375 is fully field repairable for cost savings and minimum down time.


			2008 Training Schedule



			Click here for listings for our classes and events



	Industrial Control Service Inc. --- 9267 Riley St. Zeeland, MI 49464 --- phone: 800-878-6722 --- fax: 616-748-0060

AGP-375 Double-Guided Wedge Parallel Gripper