AGLP-4

The components required for suite master are not published. Please check your publish settings in Fusion and republish the site.

"; } else { echo "

An error occured. Please contact the site administrator

Error code: 103

"; } exit(); } require_once($nof_rootDir . "/" . $nof_scriptDir . "/" . "nof_utils.inc.php"); $nof_resources->addFile($nof_langFile); ?> AGLP-4

Calendar
Testimonies
Linecard
Minority
Contacts
Videos

Vision
Motion
Controls
Sensors
Safety
Mechanical

Sign up for our Email Newsletter

Click here for listings for our classes and events

Grippers

Rotary Actuators

Powered Slides

Mini Power Slides

Feed Escapement

Hand Exchange

Load Limiters


	Contact information: IC Engineer: Roger Leep (616)-931-1322 roger@industrialcontrol.com Website: www.agi-automation.com Contact AGI: (203)-459-8345


	AGLP-4 T-Slot Bearing Series Parallel Gripper

PRODUCT SPECIFICATIONS

FEATURES AND BENEFITS

Design: Parallel-Double Acting Synchronized Jaws

Stroke: 1.00 in.

Gripping Force per Jaw @ 80psi: Closing = 14 lbs.; Opening = 14 lbs.

Time: Close = 0.12 sec.; Open = 0.12 sec.

Pressure Range: Low = 10 psi; High = 120 psi

Temperature Range: Low = -20°F; High = 180°F

Side Play: +/- 0.001"

Loading Capacity:
Max. tensile. T: 80 lbs.
Max. Compressive C: 80 lbs.
Max. Moment M_x: 100 in/lb
Max. Moment M_y: 100 in/lb
Max. Moment M_z: 100 in/lb

Material: High strength, hard coated aluminum alloys and steel

Displacement: .38 cubic inch

Weight: 5 oz

Piston Diameter: .700 in

Jaws are T-Slot bearing supported to prevent jaw breakage and offer superior load bearing performance.
High gripping force to weight ratio.
Compact Design with long stroke.
True parallel jaw motion for easy tooling.
Units are permanently lubricated for non-lube air operation, this allowing for compliance with OSHA regulations.
Pison seals are quad ring type for long service life.
Hall effect sensors are available to monitor open and closed positions of the jaws.
AGLP is fully field repairable for cost savings and minimum down time.
Gripper can be ordered with 2 different stroke on the same size body.




	Calvary CRC Golf



		Partner Login


			2008 Training Schedule



			Click here for listings for our classes and events



	Industrial Control Service Inc. --- 9267 Riley St. Zeeland, MI 49464 --- phone: 800-878-6722 --- fax: 616-748-0060

AGLP-4 T-Slot Bearing Series Parallel Gripper