|
Precision Indexing. High Speeds.
* Precision indexing tolerance to register a part to within ±.015" without sensors.
* High speeds up to 2000 fpm with ramp up/down capacity.
* Custom molded cleats to integrate perfectly with your part or application.
* Cleats are high frequency welded to the belt.
* Positive, non-slip timing pulleys.
* Self-aligning drive bearings with seals.
* Bearings can be lubricated rapidly, without drive removal.
* Stepper motors and Servo drives are PLC programmable.
* Optional self-tracking V-guide is thermally welded to the carcass of the belt.
* Nylon coated belt carcass to reduce friction and minimize noise.
* Ability to run multiple bands of belting on one conveyor.
* Timing belts are steel or Kevlar reinforced to offer high load carrying capacities, reduce stretch and
allow for precision cleat or profile placement.
* Low profile conveyor—only 3" high.
* Less than 5-minute belt change without removal of drive package or guide rails.
* Widths up to 18" and lengths up to 24' (Special widths and lengths available).
* Heavy duty load carrying capacities.
* High impact resistant single piece formed powder coated 10 gauge steel frame.
* Wide variety of application specific belting.
* Wide variety of Sides, Guides, Mounts, Stands, Drive Packages and Controls.
|
