The 111 GuardSwitch works well as a position sensor in an industrial application. Its small, sealed housing makes it ideal for use on commercial mowers or farm equipment.
2-1/2"(L) x 1/2"(H) x 1/2"(D)
ABS Plastic Enclosure
This switch has a long narrow housing that makes it ideal for mounting on overhead doors channels or machine conveyor rails.
4"(L) x 1/2"(H) x 3/4"(D)
ABS Plastic Enclosure
114 GuardSwitch
The 114 has an ABS plastic housing and works well as a position/interlock sensor in an industrial application. Its small, sealed housing makes it easy to conceal for defeat resistance.
2-1/2"(L) x 5/8"(H) x 3/4"(D)
ABS Plastic Enclosure
125 GuardSwitch
115 GuardSwitch
This switch is similar to the 114 except it has nylon 6/6 housing. This sturdy switch is used in many industrial applications because it is easy to install, conceal and is very economical.
2-1/2"(L) x 5/8"(H) x 3/4"(D)
Nylon Enclosure
126 GuardSwitch
This is a magnetically actuated position switch with a 5/8” diameter threaded barrel. This switch is ideal for situations where sensing distances may need to be adjusted.
2-3/8"(L) x 5/8"(dia.)
Nickel-plated Aluminum Enclosure
The 126 is the only GuardSwitch that comes with a 12AWG cable and flex conduit, making it ideal for closet door switch or an energy saving device applications.
2"(L) x 5/8"(dia.)
ABS Plastic Enclosure with Protective Nylon Sleeve
128C GuardSwitch
129 GuardSwitch
This is a magnetically actuated position switch with an 8mm stainless steel threaded barrel and rated up to 50VA. This switch is ideal for situations where sensing distances may need to be adjusted.
2"(L) x 3/8"(dia.)
Stainless Steel Enclosure
This is a magnetically actuated position switch with a 12mm stainless steel threaded barrel. It can handle up to 3 Amps and 100VA.
2-3/4"(L) x 5/8"(dia.)
Stainless Steel Enclosure
141 & 143 GuardSwitch
151 & 153 GuardSwitch
This small switch’s Kynar® housing makes it ideal for washdown and chemical environments such as a dishwasher/chlorine environment or parts cleaning machine applications.
2-1/8"(L) x 1-1/8"(H) x 1/2"(D)
Kynar® Polyvinylidene Flouride Enclosure
The 151/153 is a sturdy switch ideal for waste compactor applications. It is an economical sensor often used in robotic arm position applications.
2-7/8"(L) x 1-1/8"(H) x 3/4"(D)
Polyurethane Enamel-Coated Aluminum Enclosure
166 GuardSwitch
The 166 is a low profile switch that is DC only with a load rating of 100W. It is ideal for Boom truck applications such as emergency, electrical and similar service vehicles.
3-1/2"(L) x 1-1/2"(H) x 1/2"(D)
Epoxy-coated Aluminum Enclosure
171 GuardSwitch
The 171 is an interlock/position switch ideal for explosive environments where combustibles are being used such as grain elevators and painting booths. The enclosure is UL classified for: Class I, Group B,C,D; Class II, Group E,F,G; Class III, Divisions 1 & 2.
5-3/4"(L) x 2"(H) x 1/2"(D)
UL Explosion proof, Die Cast Aluminum Enclosure
181 & 183 GuardSwitch
191 & 193 GuardSwitch
The 181/183 is an interlock/position sensor in a heavy-duty aluminum housing with a conduit connection for ease of installation.
The 191/193 is a seamless stainless steel interlock/position sensor ideal for use in severe wash-down or chemical environments, such as food processing applications.
